| |
Audmods.com
Racing Pedals |
INSTALLATION DIFFICULTY: 2/5
Basic Installation - Simple Tools, No Special Knowledge Required
We specialize in custom aluminum racing pedals that are model specific, not one size fits all. We make application specific racing pedals from billet aluminum. With over a quarter million units sold worldwide since 1995, you know you are getting the best racing pedals on the market.
* The highest grip available
* Perfect fit for your vehicle
* Track proven heel toe sizing and positioning
* Aircraft quality billet aluminum construction
* OEM quality
Pedal Grip Test
After years of explaining to people how much grip our pedals have, I decided to put some numbers on them to make the explaining easier. Also, I was rather curious myself to see how our pedals stacked up against each other and stock rubber pedals. Basically, we mounted the pedals to a steady platform. Next, we put a rubber soled shoe (a Reebok)on top of the pedal. We then applied 28.6 lbs of weight to the pedal. This weight was chosen since it was the weight of a battery we had sitting in the shop, and seemed a reasonable weight for a light pressure stop. We then pulled the shoe off the pedal using a pull scale to measure how much force was required. We then repeated this process for all the pedal types a total of 5 times. The results were remarkably consistent. We then repeated all the tests again 5 times just to confirm the results.
After running the dry tests, we wanted to check the adverse condition traction of the pedals. We decided to use ArmorAll on the pedals as it is extremely slick, as well as easy to apply in the squirt bottle. We applied the ArmorAll to the shoe at the beginning of the 5 pulls, and to the pedal for each of the 5 runs. The results for all the testing is below. |
|
|
|
|
